Filter
Top Products
Playing an MD
1
2
3
4
5
FORM1
These are the basic steps necessary to play an
MD with your built-in MD player. More ad-
vanced MD operation is explained starting on
the next page.
WARNING
Do not usewith the front panel left open, after
ejecting an MD.If you do leave it open, it may re-
sult in injury in the eventof an accident.
1 MDLP indicator (×2 or ×4)
Shows when an MD featuring long record-
ing is playing.
2 Group number indicator
Shows the group currently playing.
3 Track number indicator
Shows the track currently playing.
4 GRP indicator
Shows when a group-recorded MD is play-
ing.
5 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press MD EJECT.
MD loading slot appears.
# After an MD hasbeen inserted, rotate
SOURCE to selectthe built-in MD player.
2 Insert an MD into the MD loading slot.
Front panel is closed automatically, and play-
back will start.
MDloading slot
# You caneject an MD by pressing MDEJECT.
3 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
4 When playing a group-recorded MD,
press a or b to select a group.
5 To perform fast forward or reverse,
press and hold c or d.
6 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! Do not insertanything other than an MD into
the MD loadingslot.
! An MD left partiallyinserted after ejection
may incur damageor fall out.
! Load an MD afterconfirming the MD shutter
(refer to MD playerand care on page 69) is
closed.
! When you loada disc, this unit readsinforma-
tion recorded onthe disc such as the number
of tracks. While thedisc is being read,
TOC readis indicated in the display.
! If the built-in MDplayer does not operate
properly, an error messagesuch as ERROR-11
may be displayed.Refer to Understanding
built-in MD player error messageson page 65.
Built-in MD Player
En
28
Section
07