Filter
Top Products
Using the equalizer
The equalizer lets you adjust the equalization
to match the car’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful Powerful
Natural Natural
Vocal Vocal
Flat Flat
Custom1 Custom 1
Custom2 Custom 2
Super Bass Super bass
! Custom1 and Custom2 are adjusted equal-
izer curves.
! When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
% On the normal display, touch EQ to se-
lect the equalizer.
Touch EQ repeatedly to switch between the fol-
lowing equalizers:
Powerful—Natural—Vocal—Flat—Custom1
—Custom2—Super Bass
# If SFC instead ofEQ appears on the normal
display, touch SFC and hold toswitch to equalizer
function. About SFC,refer to Using the sound
field control on this page.
Using the sound field control
The SFC function creates the sensation of a
live performance.
! One of the greatest advantages to hear
music in live is the original acoustic sound
that is echoed or reflected against the
stage surroundings. The SFC circuitry en-
ables to reproduce the live performing
sound in car environment by programming
the direct sound, early reflections, and late
reflections effects and characterizing the
sound from CD, DVD or other medium so it
becomes closer to the live acoustic sound.
1 On the normal display, touch EQ and
hold to switch to SFC function.
Touch EQ and hold until Sound Field Control
appears in the display.
# To switch toequalizer function, touch EQ and
hold again.
2 Touch SFC to select the desired SFC
mode.
Touch SFC repeatedly to switch between the
following modes:
MUSICAL (musical)—DRAMA (drama)—
ACTION (action)—JAZZ (jazz)—HALL (hall)—
CLUB (club)—OFF (off)
Note
If the source is a2-channel LPCM audio or a 2-
channel Dolby Digitalaudio and you select SFC
effects that are mostapplicable for 5.1-channel
audio (i.e., MUSICAL, DRAMA or ACTION), we
recommend turning DolbyPro Logic IIon. On the
other hand, when selectingSFC effects that are
intended for use with2-channel audio (i.e., JAZZ,
HALL or CLUB),we recommend turning Dolby
Pro Logic II off.
Digital Signal Processor
En
92
Section
19