Filter
Top Products
Touch panel key basic
operation
Activating the touch panel keys
4
2
3
1
1 Commontouch panel keys
For details, refer to Using the common
touch panel k eys on this page.
2 Information bar
3 Touch panel keys
Touch to do various operations.
4 Clockdisplay
To turn the clock on or off, or to adjust the
time, refer to Setting the clock on page 98.
1 Touch the screen to activate the touch
panel keys corresponding to each source.
The touch panel keys appear on the display.
# To goto the next group of touch panelkeys,
touch d.
2 Touch ESC to hide the touch panel keys.
Note
If you do not usethe touch panel keys within 30
seconds, they will behidden automatically.
Using the common touch panel
keys
EQ, AUDIO MENU and DISP. OFF keys are
commonly displayed in the source menu.
EQ key
Touch EQ to display the equalizer curve setting
menu. Adjust the equalizer curve and make
the best sound characteristic for the sound
type.
For details concerning operation, refer to
Using the equalizer on page 81.
AUDIO MENU key
Touch AUDIO MENU to display the menu for
various settings.
For details concerning operation, refer to Oper-
ating the menu on the next page.
DISP. OFF key
Touch and hold DISP. OFF to turn the display
off. Touch the screen to turn the display on.
Using DISP. OFF to retract the
vehicle’s antenna
At the standard setting, the vehicle’s auto an-
tenna is automatically retracted when you se-
lect the source OFF. However, when AVG-
VDP1 is connected to this unit, your vehicle’s
antenna may be kept up-position even if the
source OFF is selected. In that case, use
DISP. OFF key and have the antenna retracted
manually.
! Only when AVG-VDP1 is connected to this
unit, you can operate this function.
% Touch the source OFF, and then, touch
and hold DISP. OFF.
The display is turned off and your vehicle’s an-
tenna is retracted.
! When AVG-VDP1 andthe multi-channel
processor (e.g. DEQ-P8000)are connected
to this unit,the antenna should beretracted
at the time whenthe source OFF is se-
lected.
! While the antenna isretracted, a beep from
AVG-VDP1 is not properly mixed withthe
audio sound outputted from this unit.
Basic Operations
En
24
Section
05