Filter
Top Products
! If you select A/B andif in case you need to
operate other Pioneer units (may beavail-
able in the future),take the following proce-
dure and change thecode type to the
appropriate type.
2 Press 0 and CLEAR on the remote con-
trol simultaneously to change the code
type.
Initially, the code type is set to A. Each time
you press 0 and CLEAR simultaneously on the
remote control the code type switches be-
tween A and B.
Using the preprogrammed
function
You can operate the preprogrammed functions
for each source by using PGM.
! In order to use PGM button for prepro-
grammed function, the remote control op-
eration mode switch should be set to AVH.
% Press PGM to turn pause on when se-
lecting the following sources:
! DVD-V – Built-in DVDplayer
! M-CD – Multi-CD player
! iPod – iPod
! BTAudio – Bluetoothaudio player
# To turnpause off, press PGM again.
% Press PGM and hold to turn BSM on
when selecting TUNER as the source.
Press PGM and hold until the BSM turns on.
# To cancelthe storage process, press PGM
again.
% Press PGM and hold to turn BSSM on
when selecting TV as the source.
Press PGM and hold until the BSSM turns on.
# To cancelthe storage process, press PGM
again.
% Press PGM to switch the channel select
modes when selecting XM or SIRIUS as the
source.
Press PGM repeatedly to switch between
ALL CHand CATEGORY.
Other Functions
En
112
Section
23