Filter
Top Products
! External unit 1 andexternal unit 2 are set to
the same source leveladjustment volume
automatically.
! AUX (auxiliary input) and AV (AV input)are set
to the same sourcelevel adjustment volume
automatically.
Using the dynamic range
control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
! When playing other than the DVD disc, you
cannot switch to D.R.C.
1 Touch D.R.C on the DSP function menu.
# When playing otherthan the DVD disc, you
cannot switch this mode.
2 Touch ON to turn the dynamic range
control on.
# To turndynamic range control off, touch
OFF.
Using the down-mix function
Only when the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you can
operate this function.
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 Touch DOWN MIX on the DSP function
menu.
2 Touch c or d to select the desired level.
Touch c to select Lo/Ro. Touch d to select
Lt/Rt.
! Lo/Ro – Stereo mixthe original audio that
do not contain channelmodes such as sur-
round components.
! Lt/Rt – Down mixso that the surround
components can be restored(decoded).
Using the direct control
You can override audio settings to check for ef-
fectiveness of your audio settings.
! All audio functions are locked out when the
direct control is on except VOLUME.
1 Touch DIGITAL DIRECT on the DSP func-
tion menu.
2 Touch ON to turn the direct control on.
# To turndirect control off, touch OFF.
Using the Dolby Pro Logic II
Only when the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you can
operate this function.
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
! Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1 Touch DOLBY PRO LOGIC II on the DSP
function menu.
2 Touch any of the following touch panel
keys to select the desired mode.
! MOVIE – The Moviemode suitable for
movie playback
Digital Signal Processor
En
87
Section
19
Digital Signal Processor