Filter
Top Products
Using the external unit
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
Basic operations of the external unit are ex-
plained below. Allocated functions are differ-
ent depending on the connected external unit.
For details concerning functions, refer to exter-
nal unit’s owner’s manual.
Selecting the external unit as
the source
% Touch the source icon and then touch
EXT1/EXT2 to select external unit as the
source.
Basic operation
Functions allocated to the following opera-
tions are different depending on the con-
nected external unit. For details concerning
functions, refer to the connected external
unit’s owner’s manual.
% Touch BAND.
% Keep touching BAND.
% Touch c or d.
% Keep touching c or d.
% Touch a or b.
Using the functions allocated
to 1 to 6 keys
1 Touch d.
2 Touch any of 1 to 6 to select a function.
Advanced operations
1 Touch AUDIO MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
! FUNC1 (function 1)
! FUNC2 (function 2)
! FUNC3 (function 3)
! FUNC4 (function 4)
! AUTO/MANUAL (auto/manual)
2 Touch ESC to return to the ordinary dis-
play.
# To return tothe previous display, touch
BACK.
Setting remote control
code type
Changing the remote control operation switch
to DVD mode enables you to operate the built-
in DVD player with the supplied remote con-
trol. There are three remote codes for DVD
mode, code type A, code type B and code type
AVH. However, when operating this unit, use
the code type AVH only.
! With this unit, code A and B cannot be
used.
1 Set the remote control selection switch
on the left side of the remote control to
the appropriate position with a pen tip or
other pointed instrument .
! If you select AVH mode, thereis no need to
take the following procedure.
Other Functions
En
111
Section
23
Other Functions