Filter
Top Products
Note
Equalizer curve for the phone sourceis fixed.
When selecting thephone source, you cannot op-
erate Using the equalizeron page 81.
Setting up for hands-free
phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
the next page.
# Your phone should nowbe temporarily con-
nected. However, to make best use of the technol-
ogy, we recommend you registerthe phone to
this unit.
2 Registration
To register your temporarily connected phone,
refer to Registering a connected cellular phone
on page 74.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is recorded in this unit as the default set-
ting.
# Caller’s voice volume andring volume may
vary depending on the type ofcellular phone.
# If the difference betweenthe ring volume and
caller’s voice volume isbig, overall volume level
may become unstable.
# Before disconnecting thecellular phone from
this unit, make sureto adjust the volume to a
proper level. If the volumeis muted (zero level) on
your cellular phone,the volume level of your cel-
lular phone remains mutedeven after the cellular
phone is disconnected.
Basic operation of hands-
free phoning
Important
Advanced operations thatrequire your attention
such as dialing numberson the monitor,using
phone book, etc., areprohibited while you are
driving. When you needto use these advanced
operations, stop your vehicle in asafe place.
Making a phone call
Voice recognition
1 Touch VOICE to turn the voice recogni-
tion function on.
Voice dial icon appears on the information bar.
Voice recognition function is now ready.
# To cancelthe voice recognition function,
touch VOICE again.
2 Pronounce the name of your contact.
Taking a phone call
Answering an incoming call
1 When a call comes in, touch .
Touching
switches between callers on hold.
2 To end the call, touch
.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Bluetooth Telephone
En
72
Section
17