Filter
Top Products
Chapter 3
6. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
To edit the user STD:
1. Press the Edit key. The cursor appears below the first character of the current
STD selection.
2. Use the S (Up) and T (Down) keys to toggle between the MPEG-4 AVC and
MPEG-2 options.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.6.2.3 3.2.3 Delay Mode
To view and edit the Delay Mode, press the T (Down) key. The following screen is
displayed and the Edit key is lit:
VIDEO |DELAY MODE: STANDARD
3.2.3 |
To edit the Delay Mode:
1. Press the Edit key. The cursor appears below the first character of the current
selection.
2. Use the S (Up) and T (Down) keys to toggle between the STANDARD and
LOW (this option is only available if RX8XXX/SWO/LDELAY is enabled) options.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.6.2.4 3.2.4 RX Delay
To view and edit the RX Delay, press the T (Down) key. The following screen is
displayed and the Edit key is lit:
VIDEO |RX DELAY 4:2:0: 000
3.2.4 |
This screen shows the extra delay added (in milliseconds) on top of the standard or
low delay selected in screen 3.2.3 Delay Mode, above.
To edit the RX delay:
1. Press the Edit key. The cursor appears below the first character of the current
value.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
EN/LZT 790 0005 R1A
3-49