Filter
Top Products
Chapter 5
Figure 5.11 Alarms Web Page
The contents of this page are composed mainly of fields with drop-down menus
which allow the setting or masking of various alarms and check boxes which can be
used to activate relay mapping. Two of the alarm fields, namely C/N (Carrier-to-
Noise) Margin and Over Temperature also have associated entry fields which allow
the user to enter a value which, if exceeded, will activate the alarm.
Setting an alarm enables the alarm to be shown on the alarm LED, the alarm status
displays and is recorded in the alarm log.
Any changes which are made to the alarm settings shown may be confirmed by
selecting the Apply Changes button. Selecting the Refresh button will ensure that
the latest information is being displayed from the current values of the equipment.
5.2.4 Customization
The Customization web page allows the user to view which licenses are enabled on
the equipment and to enable further licenses as purchased by entering the custom
key provided.
To view this page, select the Customization tab from the top of the current web
page.
Figure 5.12 Customization Web Page
EN/LZT 790 0005 R1A
5-12