Filter
Top Products
Remote Control
3. Ensure the trap community, read-write community and read-only community are
configured as public or private in the same way as the MIB browse or SNMP
application being used.
4.5.2 Downloading the MIB
SNMP exposes management data in the form of variables on the managed systems,
which describe the system configuration.
The SNMP Management Information Base (MIB) stored on each unit defines which
information (variables) should be monitored.
The MIB may be downloaded from the unit as a zip file using the Web Browser
interface, see Chapter 5, Web Browser Control.
These variables can then be queried (and set) by managing applications.
Please refer to the managing application documentation for compiling third-party
MIBs.
EN/LZT 790 0005 R1A
4-7