Filter
Top Products
Chapter 3
This is the last of the Network 1 screens. To return to the top level Network 1 screen
press the W (Back) Key.
3.5.3.2.3 2.2.3 Network 2
From the Network 1 screen 2.2.2, press the T (Down) key. The following screen is
displayed.
NETWORK 2 |IP ADDRESS 2
2.2.3 |000.000.000.000 >
The Network address 2 may be edited and all of the Network 2 parameters viewed
and edited (where possible) as described in Section 3.5.3.2.2. When complete,
press the W (Back) Key to return to the top level Network 2 screen.
3.5.3.2.4 2.2.4 Setup/MAC Mode
To view and edit the MAC Mode, press the T (Down) key. The following screen is
displayed:
SETUP |MAC MODE
2.2.4 |Same >
To change the MAC Mode:
1. Press the Edit key. The cursor appears below the first character of the displayed
option.
2. Use the S (Up) and T (Down) keys to toggle between the Same and Different
options.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2.4.1 2.2.4.1 De-Jitter Buffer Level
To view and edit the De-Jitter Buffer Level, press the X (Forward) key. The following
screen is displayed:
SETUP |DE-JITTER BUFFER LEVEL
2.2.4.1 |00500
To edit the De-Jitter Buffer Level:
1. Press the Edit key. The cursor appears below the first character of the displayed
option.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
EN/LZT 790 0005 R1A
3-30