Filter
Top Products
Chapter 5
5.2 Web Pages
5.2.1 Status
To use the receiver Web Browser Interface, the IP address assigned to the receiver
control port in the front panel system menu should be entered into the address field
of the Web browser.
Provided that the network is correctly configured, the following status page should
be automatically loaded and displayed.
Figure 5.3 Status Web Page
This page provides a number of top-level status items:
• Name – Shows the configured device name for this product.
• IP (Internet Protocol) Address #1 – The configured IP address #1 for the
product.
• IP Address #2 – The configured IP address #2 for the product.
• Current Status – The current top level alarm status for the Receiver.
• Current Time – The time taken from the input Transport Stream.
• Uptime – The elapsed time since power-up.
• Input Status – The input TS lock status on the decoder.
• Video Status – The decode status of the current video stream.
EN/LZT 790 0005 R1A
5-6