Filter
Top Products
Chapter 3
3.5.3.2.6.5 2.2.6.5 Row Port 1
To view and edit the Row Port 1, press the T (Down) key. The following screen is
displayed:
STREAM 1 |ROW PORT 1
2.2.6.4 |00000
To edit the Row Port 1 value:
1. Press the Edit key. The cursor appears below the first character of the displayed
value.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
This is the last of the Stream 1 screens. To return to the top level Stream 1 screen,
press the W (Back) key.
3.5.3.2.7 2.2.7 Stream 2/ Unicast Enable 2
To view and edit the Unicast Enable 2, press the T (Down) key. The following
screen is displayed:
STREAM 1 |UNICAST ENABLE 2
2.2.7 |TRUE >
The Unicast 2 may be enabled/disabled and all of the Stream 2 parameters viewed
and edited (where possible) as descibed in Section 3.5.3.2.6. When complete, press
the W (Back) Key to return to the top level Stream 2 screen.
3.5.3.2.8 2.2.8 Alarms/ Alerts
To view the unit alerts, press the T (Down) key. The following screen is displayed:
ALARMS |ALERTS
2.2.8 |Both ports link down, Both ports no data
3.5.3.2.8.1 2.2.8.1 Both Ports Link Down/ No Data
To view the port alerts, press the X (Forward) key. The following screen is
displayed:
ALARMS |BOTH PORTS LINK DOWN Alarm
2.2.8.1 |BOTH PORTS NO DATA Alarm
EN/LZT 790 0005 R1A
3-36