Filter
Top Products
Chapter 5
User-editable fields in the Input Section:
• Input source – allows a choice of Source Selection from the drop-down menu.
• Primary Input – allows selection of the primary input to the receiver.
• Input Loss Switch Period – allows the user to define a period, in seconds,
before the unit switches to the alternate input (either Input Source or Primary).
• Return to Primary – checking this box specifies that when the Primary is locked
the unit will always return to the Primary after a timeout period.
• Primary Lock Switch Period - allows the user to define a period, in minutes,
before switching back to Primary, if Primary is not currently selected.
Any changes which are made to the Input page may be confirmed by selecting the
Apply Changes button. Selecting the Refresh button will ensure that the latest
information is being displayed from the current values of the equipment.
There is a G.703 button on this page which gives access to a further web page. This
is described in the following section.
5.2.9.1 Input > G.703 Input
To view this web page, select the G.703 button from the previous web page.
Figure 5.25 Input > G.703 Input Web Page
The following user-editable fields are displayed on this web page:
User-editable fields in the G.703 Input Section:
• Deinterleaver – checking this box enables the Deinterleaver function.
• Reed-Solomon – checking this box enables the Reed-Solomon function.
EN/LZT 790 0005 R1A
5-24