Ericsson RX8000 Stereo Receiver User Manual


 
Annex B
Parameter Specification
Tuning step 1 kHz
Carrier frequency search range
± 1 to ± 5 MHz
Receive spectrum sense Normal and inverted
L-band Power
Input power level per carrier -65 to –25 dBm
Total L-band input power < -10 dBm
Oscillator power at the L-band input < -65 dBm, 950 < Fosc < 2150 MHz
DVB-S Modulation (EN 300 421)
Modulation QPSK
Convolutional FEC rates 1/2, 2/3, 3/4, 5/6, 7/8
Symbol rate range Rs = 1.0 to 45.0 MSymbol/s
Symbol rate step 1 Symbol/s
Symbol rate lock range
± 100 ppm
Eb/No ratio See Table B.12
DVB-S2 Modulation (EN 302 307)
DVB-S2 Mode Broadcast Services
Modulation QPSK, 8PSK
QPSK LDPC FEC rates 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9. 9/10
8PSK, LDPC FEC rates 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LDPC FEC Frame length Normal
Pilot tones Automatic detection
Symbol rate range
Rs = 5 to 31 MSymbol/s, 1Msymbol/s min with
RX8200/SWO/LSYM
Symbol rate step 1 Symbol/s
Symbol rate lock range
± 100 ppm
Maximum Channel Bit rate 90 Mbps
Maximum User Bit rate 81 Mbps
Es/No (C/No) ratio See Table B.13
2
The displayed frequency is either L-band or SHF dependent on the LNB frequency and the SHF carrier frequency set in the satellite
receiver input menu.
EN/LZT 790 0005 R1A
B-12