Filter
Top Products
Chapter 3
2.2.4.7 |0 .004
To edit the MDI Media Loss Rate:
1. Press the Edit key. The cursor appears below the first character of the displayed
option.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
This is the last of the Setup screens. To return to the top level Setup screen, press
the W (Back) key.
3.5.3.2.5 2.2.5 I/P Port/ Use Input Ports
To view and edit the I/P Input Port in use, press the T (Down) key. The following
screen is displayed:
I/P PORT |USE INPUT PORTS
2.2.5 |Port 1 >
To change the input port:
1. Press the Edit key. The cursor appears below the first character of the displayed
option.
2. Use the S (Up) and T (Down) keys to toggle between the Port 1, Port 2 and
Auto options.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.3.2.5.1 2.2.5.1 Auto Revert Delay
To view and edit the Auto Revert Delay, press the X (Forward) key. The following
screen is displayed:
I/P PORT |AUTO REVERT DELAY
2.2.5.1 |00000
To edit the Auto Revert Delay:
1. Press the Edit key. The cursor appears below the first character of the displayed
value.
2. Edit the parameter value as required using the W (Back) and X (Forward) keys
to select each digit in turn, and then using the S (Up) and T (Down) keys to
increment or decrement the digit.
EN/LZT 790 0005 R1A
3-33