Filter
Top Products
Chapter 5
• Primary Input – allows selection of the primary input to the receiver.
• Input Loss Switch Period – allows the user to define a period, in seconds,
before the unit switches to the alternate input (either Input Source or Primary).
• Return to Primary – checking this box specifies that when the Primary is locked
the unit will always return to the Primary after a timeout period.
• Primary Lock Switch Period - allows the user to define a period, in minutes,
before switching back to Primary, if Primary is not currently selected.
User-editable fields in the 8VSB Section:
• Channel – allows the user to define a channel to monitor.
• Frequency – Displays the frequency of the displayed channel.
• Direct Frequency – checking this box enables the Direct Frequency option.
• Auto Tune – checking this box enables the Auto Tune option.
Any changes which are made to the Input page may be confirmed by selecting the
Apply Changes button. Selecting the Refresh button will ensure that the latest
information is being displayed from the current values of the equipment.
5.2.9 Input (G.703 ATM Input Card RX8XXX/HWO/G.703 fitted)
This page allows the user to view and edit the various inputs to the receiver. To view
this page, select the Input tab from the top of the current web page.
Figure 5.24 Input Main Page (G.703 ATM Input Card fitted)
The following user-editable fields are displayed on this web page:
EN/LZT 790 0005 R1A
5-23