Filter
Top Products
Chapter 3
options Decoder 1, STEREO to Decoder 6, STEREO are available. If disabled,
available options are Decoder 1, STEREO and Decoder 2, STEREO.
3. Select the required option and press Save to save the new settings or Edit to
abandon the operation and return to the current setting.
3.5.6.4.2 3.4.2 – 3.4.8 CH 3+4, 5+6, 7+8, 9+10, 11+12, 13+14 and 15+16 Embedding
To edit the embedding options for these channels, proceed as detailed for CH 1+2
above.
To this is the last of the Service menu options, to return to the Service menu and
access further menus, press the W (Back) key three times.
3.5.7 4 CA Systems
The CA Menu is used to access and edit the conditional access systems used in the
equipment. To access the CA Menu from the Service Menu, press the T (Down)
key. The following screen is displayed:
CA |CA SYSTEMS
4 | >
3.5.7.1 4.1 Service Table
To access the CA Service Table, press the X (Forward) key. The following screen is
displayed:
CA |SERVICE TABLE
4.1 | >
3.5.7.1.1 4.1.1 CA Summary
To access the CA summary, press the X (Forward) key. The following screen is
displayed:
CA |CA SUMMARY
4.1.1 |CONDITIONAL ACCESS ERROR >
The second line of the display shows the status of the CA system. Possible
messages are: NO SERVICE, SERVICE CLEAR, SERVICE AUTHORIZED, CAM
PRESENT DECRYPTING or CONDITIONAL ACCESS ERROR.
3.5.7.1.1.1 4.1.1.1 Service ID
To view the Slot 1 Service ID, press the X (Forward) key. The following screen is
displayed:
SLOT 1 |SERVICE ID: 2
4.1.1.1 |SERVICE NO PMT >
EN/LZT 790 0005 R1A
3-52