Ericsson RX8000 Stereo Receiver User Manual


 
Chapter 3
To edit the Gateway address:
1. Press the Edit key. The cursor appears below the first character of the Gateway
address.
2. Edit the address as required using the W (Back) and X (Forward) keys to select
each digit in turn, and then using the S (Up) and T (Down) keys to increment or
decrement the digit.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.1.1.6 1.1.6 Status
This menu displays the status of the IP control interfaces. To access the Status
menu, press the T (Down) key. The following screen is displayed:
STATUS |CTRL 1 LINK STATUS Down
1.1.6 |CTRL 2 LINK STATUS Down
When Status menu details have been viewed, press the W (Back) key to return to
the Network sub-menu.
3.5.1.2 1.2 Build
The Build menu allows the viewing of all equipment SW, FW and HW Version
numbers. To access the Build menu, press the T (Down) key. The following screen
is displayed:
BUILD |Version
1.2 |SW, FW, HW
3.5.1.2.1 1.2.1 SW Version
To view the software (SW) version, press the X (Forward) key. The following screen
is displayed:
VERSIONS |SW VERSION
1.2.1 |4.3.2 (Bank 0)
3.5.1.2.2 1.2.2 PS Version
To view the PS version, press the T (Down) key. The following screen is displayed:
VERSIONS |PS VERSION
1.2.2 |0.14
EN/LZT 790 0005 R1A
3-12