Barco MGP D5 Home Theater System User Manual

Using TheaterWatch
MGP D5 Dicom Theater Lite 87
To adjust display luminance manually, adjust the Luminance
slider. This function is not available for MFCD/MFGD 1218
displays and MGP D5 projectors.
The luminance setting is saved when the system is shut
If the slider is positioned above the CAL mark, the luminance
is in calibrated position, as determined during the latest
calibration. If the slider is not above the CAL mark, the
luminance is not in calibrated position.
If you want the system to be DICOM compliant, you must select
the DICOM display function and calibrate the display. After
calibration, the luminance must remain in calibrated position to
maintain DICOM compliance.
MGP D5 projectors are always automatically calibrated to the
DICOM display function.