Open as PDF
Barco Display Tab
MGP D5 Dicom Theater Lite 51
Firmware Revisions: This is the runtime firmware that is loaded
in the display. This information may be helpful when there is a
Internal Temperature: This is the temperature inside the display.
It starts out at about the ambient temperature when the display
backlight is first turned on, then rises slowly to a steady-state
temperature as the display warms up. Changes in light level due
to temperature variations are completely controlled by the I-
Guard sensor on the front of the display.
Current Luminance Value: This is the current luminance value of
the display. It may vary a bit from time to time, for the display
continuously calibrates itself to meet the target luminance value.