Filter
Top Products
Quick installation overview
MGP D5 Dicom Theater Lite 19
Quick installation overview
MGP D5 Dicom Theater installation overview
To install the MGP D5 Dicom Theater system completely, you
have to follow these steps:
1. Install the BarcoMed display controller(s) in the PC. For more
information, please refer to the section about the “Display
controller installation”.
2. Install and connect the medical grade projector(s) and
display(s). For more information, please refer to the MGP D5
User Guide and the display User Manual.
3. Install the BarcoMed driver software. For more information,
please refer to the section about the “BarcoMed software
driver installation”.
4. Install the MediCal Pro and TheaterWatch software. For more
information, please refer to the sections about MediCal Pro
and TheaterWatch.
5. Start and use MediCal Pro and TheaterWatch. For more
information, please refer to the sections about MediCal Pro
and TheaterWatch.
Installation examples
This chapter illustrates the most common set-ups supported by
MGP D5 Dicom Theater.