Barco MGP D5 Home Theater System User Manual

Windows 2000 BarcoMed 2MP2CP software installation
40 MGP D5 Dicom Theater Lite
Hardware Wizard - Video Controller”. Again, please be
patient as Windows will again scan its library of Plug-and-
Play device drivers to see if it has a driver for your BarcoMed
2MP2CP controller.
The BarcoMed Software Install Wizard will automatically
restart and the BarcoMed Product Installation Wizard’s
welcome screen will again be displayed (figure 11 below).
5. By default all the software on the BarcoMed Software CD will
be selected. For the initial installation we recommend that
you install all of the software. If you do not want to install a
particular BarcoMed Software product at this time, deselect it
by clearing the checkbox next to it. Click “Install” to
continue or “Cancel” to exit the wizard.
Figure 11
Driver installation
6. Click “Next” on the Display Driver Wizard’s Welcome Screen
to continue or “Cancel” to exit the Display Driver Wizard and
return to the Software Install Wizard.
The Device Selection Screen’s dialog box (figure 12 on
page 41) should show only those devices physically installed
and supported by the BarcoMed display controller driver on