Open as PDF
Barco DPMS Screen Saver
66 MGP D5 Dicom Theater Lite
Saves your current Barco DPMS Screen Saver settings. The name
you specify will appear in the Scheme list so you can easily
restore these settings later.
Deletes the scheme that is selected in the Scheme box.
In this part of the control panel the user may specify the “Begin
Work Day” and “End Work Day” times for each work day. If the
system is not expected to be used, leave both the “Begin Work
Day” and the “End Work Day” times as the same time.
Begin Work Day
The “Begin Work Day” time is the time after which the system is
expected to start being used. During the work day, the screen
saver selected by the user in the “Screen Saver During Work Day”
section is used during user inactivity.
End Work Day
The “End Work Day” time is the time after which the system is
not expected to be used any more for that day. After the work
day, the display is set to one of the DPMS states (Stand-By,
Suspend, or Off) by the display controller during user inactivity.
Screen Saver During Work Day
Lists the Available Screen Savers.
Changes settings for the selected screen saver.