Barco MGP D5 Home Theater System User Manual

Barco Display Tab
50 MGP D5 Dicom Theater Lite
Using the Barco Display Tab
All of the available display controllers that are of the same type
as the current barco display controller are shown here graphically,
with one display icon representing each output of a display
controller. The icon orientation reflects the display resolution.
Only those outputs with a display attached to them are active. If
an icon is grayed out, that indicates a output with no output
attached to it. When running DualView under Windows 2000 and
Windows XP the desktop must be extended to include each
display, otherwise those outputs will not be visible to the Barco
Display Tab.
Hovering the cursor over a display icon will pop up a window
with information that identifies the display.
You may access the Properties page of the currently selected
display, which is represented by the monitor icon above with the
black frame around it, by either clicking on the “Properties”
button or double clicking on the icon.
BarcoMFD library
This is the version of the barcomfd library currently used. This
library provides APIs for interacting with the displays.
Barco Display Properties
This screen (figure 20 on page 51) shows properties of the
currently active display.
Name: Displays the model name of the display.
Serial Number: Displays the serial number of the display.
Backlight RunTime: This is time in hours that the backlight has
been on.