Filter
Top Products
Basic Grid Type
GRD – No grid lines
GRD1–60minute grid lines
GRD2–30minute grid lines
GRD3–15minute grid lines
Search and Rescue Map Setup Page
The SAR Map Setup page provides selection of SAR
Map (Off/On), Grid Type (US/Basic), and the
Position (area of operation).
1. From the Map Setup Page, turn the
SMALL knob
counterclockwise two clicks to the SAR Map Setup
page.
Sar Map :Off
Grid Type:US
Position :SEA
2. Press
SEL to allow selection of the Search and
Rescue feature. Turn the
SMALL knob to set the
SAR Map value to ON or OFF. When SAR Map is
set to ON, the SAR Map will be available. When
set to OFF, the SAR Map will not be shown. The
SAR smart key toggles SAR Map On or Off.
3. Turn the
LARGE knob to Grid Type. Turn the
SMALL knob to choose US or Basic. The US Grid
Type Position is based on sectional aeronautical
chart grids. The Basic Grid Position is based on
Lat/Lon positions. The
GRD smart key toggles
between US or Basic.
4-16
Moving Map Functions
SEL
ab
c
d
ab
c
d
ab
c
d
ab
c
d
a b
c d
45º
46º
123
º
124
º
30’ 15’
30’
15’