Filter
Top Products
Load a Destination Airport
The destination must be an airport.
1. Load your flight plan. You may activate or edit an
existing flight plan. Press the
FPL key to reach
FLIGHT PLAN mode.
If the desired flight plan is active, go to the next
section “Load Approach Information.”
2. If the desired flight plan is not displayed, turn the
LARGE, outer knob to display the desired flight
plan.
Route 1 44.2nm
Dest Wpt: PDX
Inactive ·
3. Press
SEL. “Activate” will flash. Press ENTER to
activate the selected flight plan.
Route 1 44.2nm
Dest Wpt: PDX
Activate?
·
9-6
Approach Basics (GX50/60)
SEL
FPL
ENTER
Enroute
O
peration
CDI Scale = 5nm
30nm to
Airport
Load
Approach
to Active
Flight Plan
MSG
Annunciator
Flashes.
Enable
Approach?
Press ENT
and then
Enter Local
Altimeter
Setting