Filter
Top Products
2. The Approach Active annunciator will begin
flashing 3 nm from DEFKI (FAF) indicating that
approach RAIM prediction is beginning. The
transition to approach active is starting.
3. At 2 nm from DEFKI the CDI scale will begin
changing from 1 nm to 0.3 nm full scale deflection.
Point C (Between DEFKI and RW 11)
As you cross DEFKI, verify that the Approach Active
and OBS/HLD annunciators are on steady.
Point D (Missed Approach)
1. If you choose a Missed Approach at RW11, cancel
the Approach Active operation by pressing the
OBS/HLD key. The CDI sensitivity will now
gradually scale back to Approach Transition
sensitivity (1.0 nm full scale).
2. NEMEW will become the TO waypoint. The
inbound course to NEMEW is already the same as
the approach inbound, so you do not need to enter
it.
3. NEMEW is the MAHP and will automatically
become a holding waypoint. Verify that the
OBS/HLD annunciator is lighted.
Point E (Holding Pattern)
1. After crossing NEMEW, you will be prompted to
set the OBS course. Turn the
LARGE and SMALL
knobs to select 290° and press ENTER.
OBS DTK: 290° to
NEMEW mahp man
brg 315 dtk 315
2. Fly the holding pattern. A parallel entry should
work well.
9-41
Approach Examples
OBS/HLD
WPT SEQ
ENTER