Filter
Top Products
Countdown
Timer
The Countdown Timer allows you to set a timer that
will alert you when it expires with a flashing MSG
annunciator. The maximum time is 99:59:59 (hours,
minutes, seconds). The default time on power up is
the previous time that was entered. The factory
default time is 00:03:00 (3 minutes). You can stop the
timer by pressing
SEL twice while viewing the
Countdown Timer page.
1. While in the Navigation function, turn the
LARGE
knob to view the Countdown Timer page.
2. Press
SEL to start editing. The minutes value will
flash.
Countdown Timer
00:03
:00
3. Turn the
LARGE knob to move between the time
value fields.
Countdown Timer
00
:03:00
4. Turn the
SMALL knob to edit the hours, minutes, or
seconds value.
Countdown Timer
01
:03:00
5. Press
ENTER to start the timer with the selected
time value. You can press
SEL to reset the timer
back to the selected time.
6. After the Countdown Timer value expires, press the
MSG key to note the time out message.
3-22
Navigation Basics
SEL
ENTER
MSG