Filter
Top Products
5. Turn the LARGE knob back to the “Offset” field.
Press
ENTER when the “Use?” prompt flashes to
activate Parallel Track. A “p” will appear next to
the waypoint identifier to indicate that Parallel
Track is in use. The MSG annunciator will flash
and a message will state that Parallel Track is in
use. Press
MSG to view the message.
Parallel Track
Offset: Use?
LEFT 5.0nm
ete pCVO 00:22
0.034 “
Brg 186 46.1nm·
GPS Position The GPS Position page shows the calculated Latitude
and Longitude, as well as its Position Dilution of
Precision (PDOP). The PDOP value, shown below
“PDOP,” is based on the geometry of the satellites
used in the position solution. A lower number is a
better value than a large one. A PDOP value of 3 will
provide a more reliable position fix than a value of 7.
In the Navigation function, turn the
LARGE knob to
display the GPS Position page. The PDOP value is
shown in the lower, right corner (1.9 is shown here).
GPS Position
44°10.11N PDOP
123015.84W 1.9
3-21
Navigation Basics
MSG
ENTER