Filter
Top Products
3. Turn the SMALL knob to choose the type of editing
you want to do. The flashing selection will ask you
to choose between Ins (Insert), Chg (Change), or
Del (Delete). The TO waypoint can also be placed
on Hold. Press
ENTER when you have selected the
editing option. When a waypoint is deleted, its
position will be replaced by dashes. The Chg and
Ins choices will allow you to select a new waypoint
as used in the previous examples.
Placing the TO Waypoint on Hold
1. Press
SEL and move to the TO designation with the
LARGE knob. You can also place the TO waypoint
on hold by pressing the external
WPT SEQ (or
GPS/SEQ) button, when it is installed. You can also
place a waypoint on Hold in the Flight Plan or
FROM/TO/NEXT functions. The HOLD
annunciator will light when it is installed to indicate
that automatic waypoint sequencing is suspended.
From EUG arpt
Hold?
SLE arpt
Next HIO arpt
2. Turn the
SMALL knob to choose “Hold?” or “To?”
Placing the TO waypoint on Hold suspends
waypoint sequencing.
From EUG arpt
To?
SLE arpt
Next HIO arpt
3. Press
ENTER.
From EUG arpt
Hold SLE arpt
Next HIO arpt
Reverse the operation to return to normal sequencing.
3-30
Navigation Basics
ENTER
SEL
ENTER