Filter
Top Products
Communicati
ons Radio
Mode Smart
Keys
(GX60/65)
The Recall (RCL), Monitor (MON), Memorize
(MEM), and
FLIP/FLOP (<->) keys are available in
the GX60/65 after the
COM soft key has been pressed.
COM (GX60/65)
Press the
COM key to operate the Communications
radio functions.
Flip/Flop (GX60/65)
Press the
FLIP/FLOP key to switch between the active
(left-most) and standby (right-most) frequency while in
the Com function. You may use an optional external
FLIP/FLOP key for the same operation as the front panel
control. Switching between frequencies is disabled while
you are transmitting or editing in any function.
RCL (Recall) (GX60/65)
Press the
RCL key to recall frequencies stored in the
database.
MON (Monitor) (GX60/65)
Press the
MON key to listen to the Standby frequency.
When the Active frequency receives a signal, the
GX60 will automatically switch to the Active
frequency.
MEM (Memorize) (GX60/65)
Press the
MEM key to store the current Standby
frequency.
XIT (Exit) (GX60/65)
The
XIT key will appear on the far left of the display,
in the
MSG key position, if the COM key has been
pressed to allow use of the radio during startup
testing. Press the
XIT key to return to the start-up
sequence, or wait for test completion. The
XIT key
will disappear when testing is complete.
1-8
Introduction
RCL
MON
COM
<>
MEM
XIT