Filter
Top Products
Flying
Direct-To a
Waypoint
Pressing DIRECT-TO allows you to quickly make
changes to your TO waypoint. When you press
DIRECT-TO, the default waypoint shown will be the
current TO waypoint in the Nav or Flight Plan
functions or the waypoint displayed in the Database
or Info functions. See page 31 for more details.
1. Press the
DIRECT-TO key. The display will go
directly into the Waypoint Database and the
waypoint type will flash.
VOR CVO
SALEM
CITY OR USA
2. Use the
LARGE and SMALL knobs with one of the
Waypoint Selection techniques described on page 1
to choose a waypoint.
3. After selecting the desired waypoint, press
ENTER.
Your Apollo GX will now switch to the Navigation
function and show information based on a direct
route from your present position to the Direct-To
destination waypoint.
ete aHIO 00:12
“ 0.002
Brg 346 35.2nm·
Note
See Direct-To Entry Options on page 8 in
the System Functions chapter for details.
When the option is set to “May Clear,” your
active flight plan is deleted when you use
Direct-To for flying to a new destination. If
your new Direct-To waypoint is in the
active flight plan, the flight plan is not
deleted. When the option is set to “Never
Clears,” the Direct-To waypoint is inserted
into your active flight plan before the
current TO waypoint. “May Clear” is the
default setting.
2-7
Getting Started
D
ENTER