Filter
Top Products
3. Press SEL. The Starting Waypoint field will flash
“INS?” (insert) or “CHG?” (change). Press
ENTER
to start editing the Starting Waypoint selection.
Start: Ins?
Spacing :5.0
Direction :000
4. Choose a waypoint using normal selection
methods. Then, press
ENTER.
5. Turn the
LARGE knob to the Spacing option. Turn
the
SMALL knob to select the desired pattern
spacing. You may select between 0.2 and 9.9 nm.
Start:ONP arpt
Spacing :5.0
Direction :000
6. Turn the
LARGE knob to the Direction of Travel
option. Turn the
SMALL knob to select the desired
Direction of Travel. You may select a direction
from 0 to 359.
Start:ONP arpt
Spacing :3.5
Direction :000
7. Press ENTER when selections are complete.
8. Press
ENTER again to activate the search pattern.
You will automatically return to the SAR Map
page. The PAT annunciator above the smart key
will be highlighted. Press the
PAT smart key again
to disable the search pattern.
4-27
Moving Map Functions
ENTER
SEL
PAT
ENTER
ENTER
ENTER