Filter
Top Products
leg or waypoint and navigate to try the approach
again. Your flight plan remains unchanged.
Note
After an active approach has been canceled,
you cannot immediately reactivate it. The
approach can only be reactivated by
crossing the FAF inbound, when the FAF is
the active waypoint.
Repeating an
Approach
You must cross the FAF inbound with the FAF
selected as the active waypoint to allow reactivation of
an approach. So, set up a course to return to the IAF
and then back to the FAF.
1. Press
FPL. Turn the SMALL, inner knob to display
the IAF as the TO waypoint.
MMV to UBG
2* 018 11.6nm
arpt iaf
2. Press
DIRECT-TO and then ENTER to establish a
direct course back to the IAF.
VOR UBG
NEWBERG
FACIL OR USA
3. Press the
DIRECT-TO key twice to set a new Desired
Track (DTK) to the selected waypoint. This also
activates the OBS/HLD annunciator, so remember
to press the OBS/HLD annunciator to enable
waypoint sequencing when you have established
your inbound course.
Turn the
SMALL knob to change the flashing value.
Turn the
LARGE knob to move the cursor. Press
ENTER when finished. Press one of the mode keys
(i.e.
NAV, DB, FPL,orSYS) to quit without changing
anything.
9-16
Approach Basics (GX50/60)
ENTER
D
FPL
OBS/HLD
WPT SEQ
ENTER
D