Filter
Top Products
Setting Hold Altitude and Buffer
The Hold Altitude is an altitude where you want to
remain. The Buffer is the tolerance or range in
altitude that you can move in vertically before a
warning message is generated.
1. In the Nav function, turn the
LARGE knob to the
Hold Alt/Buffer page. Press
SEL. The Hold
Altitude value will flash.
Hold Alt 5650ft
Buffer 150 ft
ENT to Hold Alt
2. Turn the
SMALL knob to change the value.
3. Turn the
LARGE knob to the Buffer value. Turn the
SMALL knob to change the value.
Hold Alt 4550ft
Buffer 150
ft
ENT to Hold Alt
4. Press
ENTER to save the values. Press ENTER again
to activate the Hold Altitude.
Hold Rdy 4550ft
Buffer 100ft
ENT to Cancel
5. Pressing
ENTER again will cancel the Hold
Altitude.
3-16
Navigation Basics
SEL
ENTER
ENTER
Hold Altitude
Buffer
Flight Path