Filter
Top Products
3. Because OED is the MAHP, it is automatically a
Hold waypoint and flight plan sequencing is
suspended. Verify that the OBS/HLD annunciator
is lighted.
Point G (At the MAHP)
1. Upon crossing OED, press
ENTER when prompted
to set the inbound holding course (153°). Use the
LARGE and SMALL knobs to select 153°. Then, press
ENTER.
OBS DTK: 153° to
OED mahp man
brg 175 dtk 020
2. After selecting 153° inbound, enter the Holding
pattern as you would for a VOR with 153° selected
on the OBS.
Point H (Inbound to OED in Hold Pattern)
1. Once cleared to reshoot the approach and you are
established inbound in the holding pattern, fly
Direct-To OED (the IFAF).
2. Press
FPL twice (in the Map function, press SEL
twice) to reach your active flight plan.
3. Turn the
SMALL knob to reach the leg where OED
(IFAF) is the TO waypoint.
LMT to OED
1** 274° 55.9nm
arpt ifaf
4. Press
DIRECT-TO and then ENTER. Verify the
OBS/HLD annunciator is illuminated. Return to
the approach procedure beginning with point B.
9-48
Approach Examples
ENTER
ENTER
FPL
FPL
D
ENTER