Filter
Top Products
Airspace Setup
The Airspace Setup selections allows you to turn
Airspace notification (Alerts) or map display of
Airspaces On or Off, select the distance and time
buffers for airspace alerts, turn ATC rings On or Off,
and to choose the Airspace types that will be used.
Airspace alerts will not be given during an approach.
1. In the Map function, turn the
LARGE knob to reach
the Route Line/Map Orient page. Then, turn the
SMALL knob two clicks clockwise. The Airspace
Setup page is shown.
Airspace Setup
Map : ON
Alerts: ON
2. Turn the
SMALL knob to view the pages for Airspace
Setup. On this page you may select whether Airspaces
are shown on the Map display or whether Airspace
Alerts are provided. Press
SEL to start selection. The
Map choice will flash. Turn the
SMALL knob to select
On or Off. The Map (MAP) and Alert (ALE) “smart”
keys also select the options.
Airspace Setup
Map : Off
Alerts: Off
3. Turn the
LARGE knob to move to the Alerts choice.
This sets the Alert value for all airspaces. If set to ON,
each airspace alert may be set separately. Setting Alerts
OFF turns off all airspace alerts. Turn the
SMALL
knob to select On or Off. Press ENTER after
completing your choices. Airspace alerts are
automatically disabled when an approach is enabled.
Airspace Setup
Map : On
Alerts: On
4-10
Moving Map Functions
SEL
ENTER