Apollo 55 Stereo Amplifier User Manual


 
2. Now press DIRECT-TO twice. Turn the LARGE
knob to reach the reference waypoint. Turn the
SMALL knob to select BO.
OBS DTK: 150° to
BO
mahp man
brg 162 dtk 162
3. Turn the
LARGE knob to select the OBS course.
Select 105° with the
SMALL knob as the desired
inbound course. Press
ENTER. The CDI will
indicate FROM and will provide guidance on the 105°
outbound bearing as per missed approach
instructions. At 3900’, begin the climbing right turn.
OBS DTK: 105°to
BO mahp man
brg 162 dtk 162
4. When you reach 4200’, or when your bearing to BO
matches your current heading, press
DIRECT-TO
and then ENTER. This will establish a new inbound
course direct to BO.
BO NDB
USTIK (BOISE)
facil ID USA
Point D (Inbound to BO)
Fly inbound on the new direct course to BO. The
OBS/HLD annunciator will remain lighted.
Point E (Missed Approach Hold Point)
As you pass BO, establish the new inbound holding
course and enter the hold. When prompted, select an
OBS DTK of 098° with the
LARGE and SMALL knobs.
Press
ENTER.
Note
Reshoot the approach following your
missed approach, by reactivating the flight
plan leg from PARMO (IAF) to BO
(FAF)
or select DIRECT-TO PARMO (IAF).
9-53
Approach Examples
D
ENTER
D
ENTER
D
ENTER
ENTER