2. Some approaches use additional intermediate
waypoints not listed on the approach selection
page, but are shown as small squares. Press
INFO to
view all waypoints in the approach. Turn the
SMALL knob as necessary to view additional
waypoints. Press
INFO again to return to the
previous page.
LANKS ¾ D3330 ¾
OED11 ¾ CF14 ¾
OED ¾ MA14 ¾
3. At about 18 nm from LANKS you will prompted to
enable your approach. Press
ENTER to enable it and
then enter the local altimeter setting. In NAV
Mode view the home NAV page and watch your
progress to the first waypoint (LANKS).
Point A (LANKS to D3330)
1. When you arrive at LANKS, the
MSG key will flash.
Press
MSG to view the message. Press ENTER.
Arrival: LANKS
Dme Next-Use Arc
Assist? ENTER
2. You will be advised to use the Arc Assist page in
NAV mode. Verify the proper reference waypoint
(OED in this case). Press
ENTER to automatically
select the DME Arc.
Arc Assist
ref: OED vor
Press ENTER/SEL
The Arc Assist page will now be displayed. If the
displayed default reference is not the desired one for
the DME Arc, press
SEL and use the LARGE and
SMALL knobs to select the correct reference waypoint
and the Left Arc. Use this page and your aircraft
heading to fly the arc.
9-64
Approach Examples
ENTER
MSG
ENTER
INFO
ENTER
INFO
SEL