Apollo 55 Stereo Amplifier User Manual


 
Note
Waypoints that are in an active flight plan
will show up on the moving map even if its
waypoint type is set as “Off.”
1. In the Map function, turn the
LARGE knob to reach
the Map Setup page. Turn the
SMALL knob to the
Identifier & Waypoint Type page. Press
SEL to start
editing the waypoint types.
APT:¿ID INT:+ID
VOR:ÂID NDB:ÁID
Usr:ÀID
2. Turn the
LARGE knob to choose the waypoint type
that you want to edit. Turn the
SMALL knob to
choose symbol and identifier (ID), symbol only, or
“Off.” In this example, the flashing (underlined)
selection would show both the symbol and
identifier for intersections.
APT:¿ID INT:+ID
VOR:ÂID NDB:ÁID
Usr:ÀID
3. Turn the
SMALL knob to select the combination
you want shown on the Map display. In this
example, only the symbol (+) will be shown on the
Map display for Intersections.
APT:¿ID INT:+
VOR:ÂID NDB:ÁID
Usr:ÀID
4. Press
ENTER when you have completed your
selections, or turn the
LARGE knob to the next item.
4-7
Moving Map Functions
SEL
ENTER