Filter
Top Products
TASCAM LR-10 91
18–Messages
The following is a list of the popup messages that might appear on the LR-10 under certain conditions. Refer to this list if one of
these popup messages appears and you want to check the meaning or determine a proper response.
Message Meaning and response
File Name ERR
The DIVIDE function would cause the le name to exceed 200 characters. The DIVIDE function adds "
_a
” or “
_b
”
to the end of the le name. Before choosing the DIVIDE function, connect the unit to a computer and edit the
le name to less than 198 characters.
Dup File Name
The DIVIDE function would cause the le name to be the same as that of an existing le. The DIVIDE function
adds "
_a
” or “
_b
” to the end of the le name. Before choosing the DIVIDE function, connect the unit to a com-
puter and edit the le name.
File Not Found
The le added to the playlist cannot be found or a le could be damaged. Please check the le in question.
Non-Supported
The audio le is not a supported format. Please see "11-Transferring songs to and from a computer" for le
formats that this unit can use.
Battery Empty
The battery is almost out of power. Replace the AA batteries.
I/O Too Short
The IN (starting) and OUT (ending) points are too close together. Reset the IN (starting) and OUT (ending)
points with at least 1 second between them.
File Not Found
PLAYLIST
The le in the Playlist cannot be found. Please conrm that the le is still in the Music Folder.
No PLAYLIST
No les have been added to the Playlist. Add a le to the Playlist or change the play mode to something be-
sides
PLAYLIST
.
PLAYLIST Full
The playlist is full. You cannot add more than 99 tracks to the Playlist.
MBR Error Init
CARD
The card is not formatted properly or the formatting is broken. Change the card or press the Á button when
this message appears to format the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card.