Filter
Top Products
14 TASCAM LR-10
Step 6: Use the effects
This unit has built-in eects. You can use these eects on the
input signal and on the playback signal.
Press the EFFECT button briey to enable the eects. The
last eect setting used is activated and the
FX
icon appears
highlighted (light letters on a dark background).
Press this button again to disable the eects. The
FX
icon
appears as dark letters on a light background.
Press and hold the EFFECT button to open the
EFFECT
screen
where you can make detailed settings.
For details, see Chapter 12 “Using the built in eects” on page
78.
Step 7: Adjust the input and output
levels
Adjust the headphones volume ª
Use the OUTPUT (+/–) buttons to adjust the headphones
volume.
When adjusting the volume, the current level appears in a
pop-up at the bottom of the display.
For details, see “Adjusting the playback volume” on page 62.
Adjusting the microphone and line input level ª
Use the INPUT level dial on the right side panel to adjust the
built-in microphones and LINE IN input level.
Quick Start Guide