Filter
Top Products
TASCAM LR-10 63
Adjusting the balance between
playback and input signals
You can adjust the balance between the input sound of an
instrument being played and the playback sound of a le.
Use the INPUT volume to adjust the level of the input signal,
and press the BALANCE button to open the
BALANCE
item
and adjust the level of the playback signal.
Adjust the volume of the playback sound using the VALUE
(+/–) buttons. The range is from “
0
” (minimum) to “
20
”
(maximum), and the default value is “
20
”.
NOTE
The
BALANCE
setting only aects the volume when MIC or
LINE is ON ( or ). When MIC or LINE is OFF ( or
), changing the
BALANCE
value has no eect on the
volume.
Disabling the MIC/LINE input
When you want to listen to just the playback signal, you can
disable the MIC/LINE input to prevent any unwanted noise.
If you want to disable the MIC/LINE input (built-in
microphones or LINE IN jack), press the¶/MIC button when
the Home Screen is open so that the MIC or LINE icon appears
as dark letters on a light background ( or ).
Press the ¶/MIC button again to enable the MIC/LINE input.
The
MIC/LINE
icon appears as light letters on a dark
background ( or ) when input is enabled.
NOTE
If you turn the MIC/LINE input o ( or ),
OFF
appears
in the level meter area.
When the MIC/LINE input is o ( or ), the
BALANCE
setting is canceled and the playback level returns to its
original setting.
7–Playback