Filter
Top Products
40 TASCAM LR-10
Removing an SD card
Press the inserted SD card in slightly to eject it.
CAUTION
Do not remove the SD card from the unit when it is
•
connected to a computer by USB.
SD cards that meet SD/SDHC standards can be used with
•
this unit.
A list of SD cards that have been verified to work with this
•
unit is posted on the TASCAM website (http://www.tascam.
com/).
Preparing an SD card for use
To use an SD card with this unit, you must format it by using
this unit rst.
1. Confirm that an SD card is inserted, and press and hold
the [ª] button on the top panel of the unit to turn
the power ON.
2. If a new card or a card that was formatted by a different
device has been inserted in the unit, the following pop-
up message appears.
3. Press the Á button to start formatting.
Remove the SD card if you do not wish to format it.
CAUTION
Formatting will erase all the data on the card.
4. After formatting completes, the Home Screen opens.
You can also reformat a card with this unit at any time.
3–Preparation