Filter
Top Products
10 TASCAM LR-10
Quick Start Guide
Step 1: Prepare the SD card and
power
Install the SD card ª
Insert the SD card into the SD card slot, which is inside the
battery compartment on the bottom of the unit.
Formatting is necessary if you insert a new SD card.
(Formatting will erase all the data on the card.)
For details, see “Inserting and removing SD cards” on page 39.
Preparing the power ª
Using AA batteries
Insert AA batteries into the battery compartment, which you
opened when installing the SD card. This unit can use either
alkaline or nickel-metal hydride (Ni-MH) batteries. It cannot
recharge batteries.