Filter
Top Products
TASCAM LR-10 17
Use the VALUE (+/–) buttons to change the setting value.
For details, see “Changing the speed” on page 70.
Step 9: Record your performance
You can record the sound input through the built-in
microphones or the LINE IN jack. Press the RECORD [–]
button to start recording (except when the auto-record
function is on and the input level is below the set value). Press
and hold the RECORD [–] button to enable the pre-record
function and put the unit into recording standby. Press the
RECORD [–] button to start recording, capturing sound up
to 2 seconds before pressing the button. Press the [ª]
button to stop recording.
For details, see “Recording” on page 50.
Step 10: Record over a song
(overdub)
You can also record your performance together with the
music that is playing back.
Use the  and ¯ buttons to select the song. Press
the Á button while pressing and holding the RECORD [–]
button to begin overdubbing.
Press the [ª] button to stop recording.
For details, see “Recording the input sound with the playback
sound (overdubbing)” on page 51.
CAUTION
If you press and hold the record button, the unit will be put in
recording standby with the pre-record function enabled, and
overdubbing will not be possible.
Quick Start Guide