Filter
Top Products
12 TASCAM LR-10
Setting the date and time ª
Use the
DATE/TIME
item from the
MENU
to set the internal
clock to the current time.
The unit uses its internal clock to include the date and time of
the recording in its le.
The unit will function properly even if you do not make this
setting. When you rst put batteries into the unit, however,
the clock will begin advancing from the default value of
2000-01-01/00:00:00 and this incorrect date and time will be
added to recording les. (See “Setting the date and time” on
page 45.)
Step 2: Copy audio files from a
computer
Prepare the audio les ª
Create audio les using the functions of the computer
operating system or other computer software applications.
Be sure to use le formats that this unit can play back. These
formats include MP3 (32–320 kbps, 44.1 kHz) and WAV (44.1
kHz, 16/24-bit).
Connect the computer ª
Use the included USB cable to connect the unit to the
computer.
Transfer les from the computer ª
Copy audio les to the MUSIC folder on the LR-10 drive that
appears on the computer.
Disconnect from the computer ª
After using the correct procedures to dismount the LR-10
drive from your computer, disconnect the USB cable. The unit
should automatically turn o.
For details, see Chapter 11 “Transferring songs to and from a
computer” on page 76.
Step 3: Select the input
Set
INPUT
to
MIC
to use the built-in microphone to practice
singing or playing a wind instrument, for example.
Set
INPUT
to
LINE
to use the LINE IN jack to practice playing
a synthesizer or electronic piano.
Quick Start Guide