Filter
Top Products
48 TASCAM LR-10
5–Recording
This unit can record a performance through the built-in mic or
from a keyboard or similar instrument that is connected to the
LINE IN jack. The audio le format used for recording is always
44.1 kHz, 16-bit WAV.
In addition, this unit can also mix the input signal and an
audio le that is playing back and record both together
(overdubbing).
Setting the location where recorded
files are saved
You can set the location where recorded les are saved. (See
“Folder operations” on page 59.)
If you do not set a destination, les will be saved directly in
the MUSIC folder.
Setting the input functions
1 Press the MENU button to open the
MENU
Screen.
2 Use the §/BROWSE and ¶/MIC buttons to select
INPUT SETTING
, and press the Á or ¯ button to
open the
INPUT SETTING
screen.
This screen has the following setting items.
Use the §/BROWSE and ¶/MIC buttons to select the
desired item. (When selected, the “
:
” becomes “∑”
and the setting value appears as light letters on a dark
background.) Use the VALUE (+/–) buttons to change the
setting value.
The
GAIN
,
TYPE
,
LOW CUT
and
LEVEL CTRL
items only
function when
INPUT
is set to
MIC
.
INPUT:
Set the input source to microphone (
MIC
) or line (
LINE
).
The default setting is
MIC
.
When
MIC
is selected, sets the input source as the built-in
microphones.
When
LINE
is selected, sets the source as the line level
signal input to the right side panel LINE IN jack (stereo
mini-jack).
GAIN:
Set the built-in microphones input sensitivity as
HIGH
,
MID
, or
LOW
.