Filter
Top Products
TASCAM LR-10 53
6. Press the [ª] button to stop recording.
Starting and pausing recording
automatically (AUTO REC)
This unit can be set to automatically start and pause recording
in response to the level of the input signal.
1. Press the MENU button to open the MENU screen.
2. Use the §/BROWSE and ¶/MIC buttons to select the
AUTO REC menu item, and press the Á or ¯ button
to open the
AUTO REC
screen.
3. Use the §/BROWSE and ¶/MIC buttons to select the
MODE
item.
4. Use the VALUE (+/-) buttons to set it to
ON
.
5. Press the §/BROWSE or ¶/MIC button to select the
START
LEVEL
item.
6. Use the VALUE (+/–) buttons to set the input signal
detection level to
-6dB
,
-12dB
(default value),
-24dB
or
-48dB
.
7. After completing the setting, press the HOME button to
return to the Home Screen.
8. Press the RECORD [º] button to start recording standby
and RECORD [º] button indicator blinks.
Press and hold the RECORD [º] button to enable the
pre-record function and put the unit into recording
standby.
5–Recording